Home made boxscraper

admin

Here is a photo of a homemade box scrapper for my john deere riding lawn mower. It was bulit using a cutting torch and a lincoln buzz box. I just purchased a miller xmt 304 inverter but having problems with it, can;t wait to get it up and running for future bulids. Attached Images
Reply:I don't know anything about scraper equipment but the project looks like it came out nice.MM350P/Python/Q300MM175/Q300DialarcHFHTP MIG200PowCon300SMHypertherm380ThermalArc185Purox oaF350CrewCab4x4LoadNGo utilitybedBobcat250XMT304/Optima/SpoolmaticSuitcase12RC/Q300Suitcase8RC/Q400Passport/Q300Smith op
Reply:That looks great, you did a good job.Tim Beeker.
Reply:nice job, you gotta let us know how it works out. How big is your lawn tractor ??/ Oh, I hope you get a chance to try it, those 2 red looking containers with spouts on them may be a problem . I sure  hope they are not for gasoline! that heater and gas fumes could be bad. Sometimes we don't realize what we are doing when we get going on our projects. We all want to wake up the next day. not being nasty just want all to be safe.
Reply:Originally Posted by BD1nice job, you gotta let us know how it works out. How big is your lawn tractor ??/ Oh, I hope you get a chance to try it, those 2 red looking containers with spouts on them may be a problem . I sure  hope they are not for gasoline! that heater and gas fumes could be bad. Sometimes we don't realize what we are doing when we get going on our projects. We all want to wake up the next day. not being nasty just want all to be safe.
Reply:I have seen a lot worse factory built minibox blades.  This could be a good side income....Esab Migmaster 250Lincoln SA 200Lincoln Ranger 8Smith Oxy Fuel setupEverlast PowerPlasma 80Everlast Power iMIG 160Everlast Power iMIG 205 Everlast Power iMIG 140EEverlast PowerARC 300Everlast PowerARC 140STEverlast PowerTIG 255EXT
Reply:also , your TV's facing the wrong way , hard to watch while working.Please let us know how the box trowl works.....i'm gonna copy yours for my Murray tractori'm thinking though ,  the lever should be a little easier to reach while your on the mower , so u dont have to get off to operate..?        thermal arc 252i  -  millermatic 350P -   miller XMT, cp300ts, 30a 22a feeders, buttload of other millers, handfull of lincolns, couple of esabs  -   Hypertherm 1250 G3
Reply:I would like some details on how you bent the tube.  very clean looking.  I hope those arent HF wheels lol
Reply:This picture was taken when there was no work being done, the gas cans just happen to be back there. I enjoyed buliding the scraper just like everything else that I bulid. The bent tubing was a scrap part from where I work where we do alot of bending and welding. Thanks again to everyone who replied.Miller XMT 304Lincoln Buzz BoxVictor Cutting Torch OutfitHobart Generator/Welder