a friend of mine that has a truck need a tool box made I have made and posted other stuff I made for him here I started it after work today half 2 (2.30)knock off on Fridays had to drive across town to another workshop to use there guillotine and folder we don't have them at work he didn't charge me as he was my apprentice about 15 yrs ago any ways 20 min drive there and back and finshed it at 5 (5pm)I tiged it up on 6 sides and 2 sides on the lid as the folder couldn't fold it in one piece and to make it look nice its 3mm ally checker plate and 5mm ally checker plate back wall so with 2 and a half hours to build it thats cut fold trail fit then tack and weld which comes down to 1 hr 50 mins after I take out travel time I think it looks ok Last edited by wello; 10-13-2006 at 05:28 AM.Creative metal Creative metal Facebook
Reply:nice ChuckASME Pressure Vessel welder
Reply:good job!funky design on the sheet... ...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Looks nice!
Reply:Nicely done. I assume it is a lot harder to weld on the corners like that then on a simple butt joint?
发表于 2021-9-1 00:36:51