|
|
This is the welding table I made about 6 months ago.The frame is all aluminum. The 4 vertical legs are 4x4x1/8" wall tubes and the horizontal parts are 2x4 tubes stitch welded together.The top is 3'x6' x 1/2" thick steel. I drilled 66 5/8" holes on a 6" x 6" pattern through the top for clamping. It's on casters and has levelers at each end. Attached ImagesThere are no small projects
Reply:Nice table.But I only count 55 holes in the top.
Reply:Originally Posted by MoonRiseNice table.But I only count 55 holes in the top.
Reply:great looking table, should be real handy. 8^)) summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time. |
|
发表于 2021-9-1 00:36:44