Here are a few bench tool stands...Step by Step details are Here Attached Images
Reply:Where are the details? This is my kind of project!M
Reply:Oh, you have to click on the word 'Here' in my previous post.GT
Reply:are you sure you trust a drill press on such a small base? anchors or not...just be ready when it starts heading your way... put something "slightly heavy" on that table and you are already past the balance point..be careful.....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Thanks for the tip on the concrete anchors - I'll definitely keep my eye on it. It is a very small drill press - it seldom has anything more than a piece of 1/4" angle on it.
Reply:Originally Posted by GT_Man002Thanks for the tip on the concrete anchors - I'll definitely keep my eye on it. It is a very small drill press - it seldom has anything more than a piece of 1/4" angle on it.
发表于 2021-9-1 00:35:35