Abrasive Saw Quick Jig

admin

Anyone have a JIG they have built for an abrasive saw?  Basically, I get sick of adjusting the guide on mine for angled cuts.  I want to build a jig to quickly set a piece at a desired angle, but am looking for some ideas.The Lord has declared, "This is my work and my glory--to bring to pass the immortality and eternal life of man"  Moses 1:39Link: My name is John, and I am a member of The Church of Jesus Christ of Latter-Day Saints.-- ColdCreekWorks.com --
Reply:Hmmm.... guess I may need to come up with my own design and post it.The Lord has declared, "This is my work and my glory--to bring to pass the immortality and eternal life of man"  Moses 1:39Link: My name is John, and I am a member of The Church of Jesus Christ of Latter-Day Saints.-- ColdCreekWorks.com --
Reply:I do, but it's in a box with the rest of my gear. I used some scrap angle iron, welded together at the angle needed, and clamped to the saws fence. Thought a threaded hole in the fence would work as well, to bolt it on. Go slow cutting, to avoid too much blade deflection.200amp Air Liquide MIG, Hypertherm Plasma, Harris torches, Optrel helmet, Makita angle grinders, Pre-China Delta chop saw and belt sander, Miller leathers, shop made jigs etc, North- welders backpack.