|
|
These are 3/4 gussets welded to 3/8 plate. Verticle up. Spec is 3/8 weld. I am allowed NO spatter, which I will clean off and NO undercutting. 19 volts, 150 Ipm .045 ER70S-6 wire, Co2 gas. Incuctance on -7.Whaddyathink?David Attached ImagesReal world weldin. When I grow up I want to be a tig weldor.
Reply:Looks good from where I sit. John - fabricator extraordinaire, car nut!- bleeding Miller blue! http://www.weldfabzone.com |
|
发表于 2021-9-1 00:33:50