Plasma practice...

admin

I got a new toy and tried it out on some 1/4" plate...Miller 252 Mig WelderMiller Spoolmatic 15AMiller Econotig TIG/ARC WelderMiller Spectrum 375 Extreme Plasma Cutter
Reply:My plan is to hang it on this sign post at our hunting cabin.Miller 252 Mig WelderMiller Spoolmatic 15AMiller Econotig TIG/ARC WelderMiller Spectrum 375 Extreme Plasma Cutter
Reply:nice.. how did you transfer the drawing to the steel?
Reply:Verry nice, and congrats on the new addition to the shop.My Photos on Flickr
Reply:Originally Posted by Jeep07nice.. how did you transfer the drawing to the steel?
Reply:very niceChuckASME Pressure Vessel welder
Reply:I use a grease pencil for marking. Easier to see than a sharpie.My Photos on Flickr
Reply:chopper5/chuck where did you come up with your flamed logo??? kewl!!!
Reply:I'll have to try the grease pencil, does it melt when you put the heat to it?Miller 252 Mig WelderMiller Spoolmatic 15AMiller Econotig TIG/ARC WelderMiller Spectrum 375 Extreme Plasma Cutter
Reply:AWESOME!!!!!!
Reply:Nice work with the plasma. Nice machine also....... But what I really like is the Mopar shop! Nice looking shop from what I can see.Patriot Performance AutoLincoln Power Mig 255CLincoln AC-225 StickVictor Journeyman O/AQuincy QT-5 Compressor
Reply:Nice toy! nice artwork. Victor SuperRanger O/A                                         Solar migLincoln Powermig 140Southbend 9in lathe350# kohlswa anvilMiller Maxstar 150 stl etc....
Reply:nice work and nice machine
Reply:Originally Posted by RoadRnnr69I'll have to try the grease pencil, does it melt when you put the heat to it?
Reply:Here it is ground, chain welded on and painted...Miller 252 Mig WelderMiller Spoolmatic 15AMiller Econotig TIG/ARC WelderMiller Spectrum 375 Extreme Plasma Cutter
Reply:VERY COOL!!  What are the dimensions on that thing?  In the last photo it seems much bigger than the first one.That is a very nice machine you have there, I'm DYING to get me one lol!Have a Jeep Cherokee?  Click Here!
Reply:Thanks!!!It is approximately 24" x 24".Miller 252 Mig WelderMiller Spoolmatic 15AMiller Econotig TIG/ARC WelderMiller Spectrum 375 Extreme Plasma Cutter
Reply:Originally Posted by Patriot PerformanceNice work with the plasma. Nice machine also....... But what I really like is the Mopar shop! Nice looking shop from what I can see.
Reply:Installed my new sign...Miller 252 Mig WelderMiller Spoolmatic 15AMiller Econotig TIG/ARC WelderMiller Spectrum 375 Extreme Plasma Cutter
Reply:Nice job.My Photos on Flickr
Reply:Thats cool, makes me wish I already had my plasma cutter. I'm still on the fence, don't know which one I should get. At least I have narrowed it down to the Miller, Thermal Dynamics or the Hypertherm. One bad a$# car by the way.grizz_____________________________________________Miller DVITD-39HF 4x6 BandsawHF Bender & Ring RollerCraftsman 12 inch Drill Press4.5 inch Grinders10 inch Metal shearAnd numerous other little goodies!!!
Reply:Thanks!!!I wasn't sure which to get the first time. I started with Miller Spectrum Thunder which is the same as the Spectrum 125C today.I just sold it last week!!This new one is awesome!!!! After trying the other one I learned what I wanted and what I wanted it to do.If I ever get caught up I am going to finish this car next. I painted it 5 years ago and haven't touched it since!!!Miller 252 Mig WelderMiller Spoolmatic 15AMiller Econotig TIG/ARC WelderMiller Spectrum 375 Extreme Plasma Cutter