3g cap

admin

i want to get some advice on my 3g innershield welds. using a fast freeze wire something like E71T i believe. here is a picture of a cap i did the other day at school.6G zirconium 702 GTAW 2" xxheavy6G P.E.D. carbon steel GTAW 2" xxheavy3G titanium Gr. 2 - Gr. 7 GTAW up to 3/4" 3G 316L stainless GTAW up to 1" 3G carbon steel GTAW up to 1" 3G Hastalloy GTAW up to 3/4"1G tantalum GTAW up to .060"
Reply:Looks very nice!Keep up the good work.....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Did a beaver chew that piece off? lol JK nice weld!Nothing Ever Got Done By Quitting, Never Give Up.
Reply:ya haha i didn't cut that edge.we all share and someone else cut it.6G zirconium 702 GTAW 2" xxheavy6G P.E.D. carbon steel GTAW 2" xxheavy3G titanium Gr. 2 - Gr. 7 GTAW up to 3/4" 3G 316L stainless GTAW up to 1" 3G carbon steel GTAW up to 1" 3G Hastalloy GTAW up to 3/4"1G tantalum GTAW up to .060"
Reply:Nice looking weld.  What wire, up or down, gas, volts, amps, polarity?   JohnSMAW,GMAW,FCAW,GTAW,SAW,PAC/PAW/OFCand Shielding Gases.  There all here. :
Reply:you should beable to go straight up with that too, it took me a few tries but it works pretty good, just start with 25 volts (c-25 .045 wire)and go up slowly move just before it looks like its going to fall, its something to try. ( I didnt see you were looking for advice the first time i thought you were just showing off haha)Nothing Ever Got Done By Quitting, Never Give Up.
Reply:Originally Posted by weldgaultNice looking weld.  What wire, up or down, gas, volts, amps, polarity?   John