Its another mig cart

admin

Heres my cart i put together using scrap laying around in the shed and bits and pieces gathered from people.Well enough with the talk heres the pics.
Reply:Boy, you guys and your clean carts! I snagged an unused push cart at work, probably an HF special with half the screws missing, plywood for deck support and generous portions of rust for a quick set of wheels to put my Miller on! NO, pictures are NOT rated here!! But the sucker rolls just fine.  And cost me half an hour to replace the missing hardware and plop a wooden false floor underneath the machine for welding lead clearance, Oh yeah! That's a nice cart you made, it needs a gas bottle though!!! City of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:Gas bottle is next on the to do list. only just got the welder 2 weeks ago so i been using the flux core it came with. For me this was a learning curve as i haven't had any experience with mig until now.
Reply:What is flux core wire like? I need to do some welding outside and i have only used Gas for years so i was wondering how flux core is to use.
Reply:its a little messy with slag and all but all in all i dont really thin its that bad. Bit of wire brush action and comes up a treat. It has its purposes.
Reply:Love what you did with the cut up wrenchs to hold cable, etc.   Now that is inventive and adds character!  Originally Posted by SANGERGas bottle is next on the to do list. only just got the welder 2 weeks ago so i been using the flux core it came with. For me this was a learning curve as i haven't had any experience with mig until now.
Reply:very flashy..... great , niceUnit in my fab shop dept:my good hand and team that trust me...A lone welder make art... a village full of welder make Miracles...
Reply:Verry nice cart.... you have better looking scrap than I do.My Photos on Flickr
Reply:that cart looks awesome
Reply:Thanks guys all the frame was scrap angle and the side panels were left over from a menswear display that was no longer needed. Had to buy the aluminium but thats about it.
Reply:Thats a nice cart, you did a good job.How do you like the welder?
Reply:Welder is awsome so far. Still haven't seen its full potential but will once i set it up on gas.
Reply:looks great!nice workTalent is a flame. Genius is a fire.- Bern Williams
Reply:Nice looking cart. I think you did a great job.Miller DVI2Lincoln Precision Tig 225Thermodynamics Cutmaster 38Everything else needed.
Reply:Make some little fenders for the rears.....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Thanks for the positive comments all... Originally Posted by zapsterMake some little fenders for the rears.....zap!
Reply:That thing is sweet!!!!MolongneckLincoln 175HD MigWard's Powr-Kraft 230 ARCHypertherm Powermax 45Harris O/A TorchMakita 2414NB Chop SawMakita 9557PB 4 1/2" Angle GrinderClarke BT 1002 6" Brench GrinderRyobi DP 120 12" Drill Press
Reply:Very Nice Cart!!Reallly like the look of the side panels, I may have to try to locate some for my cart so I can say I am done adding to it and paint it finally. Its only been 4 years in the mods.Note to self.......The jacket in the avatar pic is Not for welding....EVER
Reply:thats a nice cart, i wish i had the room for a cart that size. heres a cart i modified for my welders, befoe paint. Attached Images