|
|
Who knows where I can get a welder in the DFW area like tomorrow for a good price?I am looking for a Hobart 11k or maybe Miller Bobcat.Thanks
Reply:There have been several on craigslist lately both DFW and Austin - I keep an eye on both of them - not too bad of a drive either way.
Reply:I have seen a few of them, but was hoping for somethig new.
Reply:You might check out Blanks, they have treated me right when I've been out that way.http://blanksweldingsupply.net/3233 BRYAN AVE.FORT WORTH, TX. 76110PHONE 817-921-0241Or if you dont mind a short drive try Carroll in Abilenehttp://www.carrollwelding.com/Family owned place that will bend over backwards to make sure things are your way.
Reply:Contact Larry BurrossApplied Equipment, Inc.2515 Cartwright St.Dallas, Tx 75212214-630-9353 phone214-630-9354 fax888-630-9353 toll-free214-577-9353 cell786-629-9353 computerEmail: [email protected] w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:+1 on calling Larry
Reply:Phillips Welding Supply in Weatherford has the cheapest prices on Millers anywhere. My 225 was right at 2900 dollars. 817-596-0450Ask for Mark, he'll take care of you.Kevin- Springtown, TexasTruck:Chevy cab/ chassis 1 ton dually, big block and flatbedMiller BobcatVictor cutting rigTool boxes crammed full of stuffShop:Millermatic 250Lincoln 135Lincoln 225AC tombstone
Reply:+2 on Larry. He's a straight shooter and got me a used Dynasty 200 for several hundred bucks lower than anyone else could come close to.Miller Dynasty 200DXMillermatic 210 w/ Spoolmate 3035Hypertherm Powermax 380JD Squared Model 32Multiple fabrication tools & equipmentFull Powder Coating Setup
Reply:Larry did offer me a good deal over the phone on a Bobcat 225, but couldn't ever call me back to confirm he had it. I called him twice and he was still looking for it or anything else. He seemed very willing to help.However I needed one today and he could come through so I found a Ranger 225 for 2900 and it has a 200 rebate. So 2700 for a Ranger 225 is not a bad deal at all. Thanks everyone. |
|