My First Project (welding cart)

admin

I saw some other projects on here and wanted to show off my first project. Leon Attached Images
Reply:very nicely doneAs said by CHENRY:you cant weld on a thingamajig like that. are you even certified to do thingamajig welding ? I once saw an improperly welded thingamajig fail and eleventy twelvoteen things got ballywhacked. I dont think i would risk it.
Reply:Very Nice,that looks great.pro-level dumpster diver                                     Hobart 125EZ
Reply:Nice work!! I like the caster wheel supporting the bottle!  It ceases to amaze me no matter how many carts ya see, you always get ideas!DanMy instructor said someone will catch on fire during class...He wasn't joking!!
Reply:That should give you many years of service.....good job.If you don't want to stand behind our Troops, feel free to stand in front of them.
Reply:Nice design, I like the hangers.
Reply:nicely done. what were the materials used? it looks like 3/16" or 1/2" round bar and some 2" angle. i really like that bottle mount. is it just hinged with a clip on the other side? plus, you con;t ever go wrong with red. lol.Later,Andy
Reply:I used 2" angle on the sides with a section cut out so the access door can open. On the front, back, and down the center underneath I used 2" flat strap. For the bottle support I used 3/4" square tubing and 1" flat strap bent in half moon shapes for the top and bottom supports, there isn't a hinge, you need to pull the bottle up and put. I used 1/2" round for the front and top bars and little 1/4" for the hooks. Since the picture I added a round support out of 1/8" to hold the nozzle dip container. Leon
Reply:Originally Posted by leonandlisa...Since the picture I added a round support out of 1/8" to hold the nozzle dip container.
Reply:Clean, neat, and red.  Nice job.  Don't weld the golf clubs  or those shoes though.  And depending on locale and hobby-vs-business, you might have to put 'mushroom-heads' of some sort on top of your upright pegs/hooks.  For the fallen-person-anti-impalement regs/requirements.
Reply:I think you did a great job.I have the same unit. I just hate how Lincoln placed the gun cable sticking out the front of the box there. It's always in the way. No real neat way to wind it up. Maybe if it came out the top it would be easier to hang the cable. I dunno. Either way, you made the best of it and are on a roll!!Lincoln Power Mig 210MP MIGLincoln Power Mig 350MP - MIG and Push-PullLincoln TIG 300-300Lincoln Hobby-Weld 110v  Thanks JLAMESCK TIG TORCH, gas diffuser, pyrex cupThermal Dynamics Cutmaster 101My brain