New rig

admin

Well I finally pulled the trigger and picked up a new Miller Dynasty 200DX. Wow what a bucket of fun! I have already burned up about half of my 80lb argon bottle just practicing. I thought that I would post a couple of pics of my new fun.This is 1/8" channel with a 1/8 strip welded in. Settings were.100amps, 1/16" red tungsten, waveshape 75%, frequency 100htz.Balck soot is where I migged it together a while back.I think I am on the right track for only a couple hours of TIG welding.Thoughts?"If you live in Sacramento you have seen my work."
Reply:Weld looks good, but you need to add more filler.  You have undercut on the top of the weld.  But other then that, for just starting to Tig.  Looks great.
Reply:was that tig or mig not bad. try using miller syncrowave their really good with tig alum.