repair broken neck (motorcycle neck)

admin

1:   scooter w/problem  2:  broken neck, bearing race that fits into broken area  3:  closest stock I had, pipe with ID a little too large  4:  split pipe, closed gap in vice, welded  5:  cut new bearing bore from pipe stock- continued Attached Images
Reply:1:  new part welded on, had a few problems-wind, ground out porosity in 2 spots and rewelded.  2:  finished repairTIG, argon, 3/32 thor, 3/32 70s2, Attached Images
Reply:Cool!
Reply:Thanks, I enjoy the step-by-step photos and explanations.9-11-2001......We Will Never ForgetRetired desk jockey. Hobby weldor with a little training. Craftsman O/A---Flat, Vert, Ovhd, Horz. Miller Syncrowave 250
Reply:Nice repair.How the hell can you ride a bike with Soooooooooooooooooooooo much play in the headstock and not notice
Reply:Nice work"SOUTHPAW" A wise person learns from another persons mistakes;A smart person learns from their own mistakes;But, a stupid person.............never learns.
Reply:Originally Posted by cranestCool!
Reply:That is a beautiful repair, and I mean beautiful!!"Any day above ground is a good day"http://www.farmersamm.com/