Another Skid.

admin

Just almost finished my skid. I still have some hooks and lead hangers to weld on. Sorry couldn't get more pics but I kept forgetting to grab the wifes camera. And I still haven't called Apple to figure out how to download pics from iPhone.Angle is 3" x 3" x 1/4", bottom frame is 4" sq. 1/8" wall tube left over from a parking lot light demo, flat sheet is 1/4", cross channels are 6", 4 - lift plates are 1/2" flat x 4" wide. Completely welded with Hobart Fabshield 21B flux core.Last edited by Stick-man; 03-23-2011 at 05:30 PM."Where's Stick man????????" - 7A749"SHHHHHH!! I sent him over to snag that MIC-4 while tbone wasn't looking!" - duaneb55"I have bought a few of Tbone's things unlike Stick-Man who helps himself" - TozziWelding"Stick-man"
Reply:Looks familiar...  Nice looking setup man! Hope you get to burn the hell out of rod with that thing!You have to learn the rules of the game. And then you have to play better than anyone else. Albert Einstein
Reply:Originally Posted by jreynoldsweldingLooks familiar...  Nice looking setup man! Hope you get to burn the hell out of rod with that thing!
Reply:Originally Posted by tackitGood job, it's built strong.
Reply:Nice work and nice design Stick-man. Well done!Gordhttp://gordsgarage.wordpress.com/
Reply:Square holes?  Looks like a skid!  Might consider coming up with a way to lock your cables up so they don't walk off (trust me on this!)  Now all you need is a bottle rack, and you are set!
Reply:Originally Posted by gordsgarageNice work and nice design Stick-man. Well done!Gord
Reply:Originally Posted by mb_welderSquare holes?
Reply:Originally Posted by 7A749Now, you just need a helicopter to haul it around from jobsite to jobsite
Reply:Originally Posted by tackitStick-man I was thinking the lower frame tube acts like a reciever tube for the scafolding wheel's  frames to slip into and pinned.
Reply:Originally Posted by 7A749Now, you just need a helicopter to haul it around from jobsite to jobsite