I would love to post some picks but I can not figure out how to do so using an I phone and my pictures on my phone.... Any advise on this will return to yiuall pictures.... Tell me what you think... I had to rig out a 2004 GMC Sierra 4x4 2500 HD cause that's all I have... Have a new Hobart 225 challanger great arc consistecy I'm very happy with it I was scared to leave the sa 200 under the tarp under the oak but I can tell very little diffrence ....tho there are some it's alot louder and anything excites it and you can hear it dragging especially going back and forth filling a hole or loading it up on normally easy aplications like up hill 7018 h4r ... I have my leads on a stand I made out of inch and 3/4 pipe and 4 plater of 10 guage and a 25 foot extension cord in the middle .... Between the cab and my machaine I have my sumners and passenger side is my aced bottle.... And 20 ld ABC amerex fire ext back on the driver side infrount of my leads is my amerex 20 lb water extinguisher.... Then my machaine them my oxigyn bottle along my machaine o need to get yiuall some pictures so I can get some advise on the final touches .... After all five pictures would have saved 1000 words.... And I need a little support and confidence boost from my fellow weldors....
Reply:create a photobucket account, and it had the code right under the pictures that you can paste in your posts here.ESAB MigMaster 275Miller Econotwin HFMiller Syncrowave 250
发表于 2021-8-31 23:35:40