Marquette Mig Welder 12-185

admin

I inherited a Marquette Mig Welder Model 12-185.  Does anyone know where I can get a user manual for this welder?
Reply:I also have a Marquette Welder.  Some time ago, Lincoln aquired them and they are no longer manufactured.I called Lincoln and after some searching they found a manual that they copied and mailed out.Hope this helps.  They also gave me a contact that has parts and repairs them.  Not sure where you are located, but they are in Toronto Ontario.  Let me know if you want the number.
Reply:I hope that you can help me-I was given a Marquette 12-185 MIG welder, and I am trying to find an owners manual for it.  I saw where you had posted to another person that you had a number for them in Ontario, Canada.  I would like to have that number if you would share it.  Thanks kansaswelder
Reply:Did you ever get that phone number from the man that said he had it?  I am looking for an owners manual for my recently acquired Marquette 12-185 welder, and have had no luck.  Is there anyway that you can help me?  Thanks kansaswelder
Reply:I just inherited a Marquette a 12-185.  Does anyone have a contact for parts and or a manual.  One of the resistors on the control printed circuit board ( 5101-A) is dead and I wanted to get a schematic or some diagrams of the welder to fix it.  The markings on the resistors are burnt so I can't read the color stripes.  Any information would be useful.  Is that phone number from the previous responses available?Thanks, fjvascon
Reply:I have a marquette 179 mig welder that I use to play around with.  I recently broke the plastic piece that holds down the wire are it goes through the feed roller.  it is the piece that is held down by the adjustment knob.  I am having  problems finding replacement parts.  Could I get the number from the previous post, a website to the place in canada, or a copy of the manual you were talking about.