|
|
i have a 200 sm that worked like a champ till i loaned it out,,, forgot who had it then i remembered, went thru the usual" you already got it back, i brought it back, you sent a guy with note to take it" well i went thru his junk trucks and found it in the bed of an old ford,, 2 years outside!!! the fan drives but wont strike a spark, i suspect the board but dont know, everything looks good, no obvious burns or blowouts, i did find voltage at the rectifiers also on the ON POWER light, it just wont weld,, what would u suggest to look for, does anyone have a powcon board 105019, i did find one company sed they had a new never used 105019,, 754.00$, wont be getting that one, ive been looking at AHP160 i think stick and tig,, any ideas, suggestions??? buck
Reply:You might look thorugh the threads in the Powcon section. I last used ARC products but have heard they are out of business. Bodine Elecric welder shop in Decatur IL (217) 423-2593 Ask for Brian. They will work on them but I am not sure where they get parts.You might consider pushing back on thte dead beat you loaned it to. Tell him you loaned him a working machine and you want a working machine back. A miller XMT 304 would be a good trade.Maybe you only have dirty contacts in the switches and relays. Good luckDan D.Manipulator Of Metal
Reply:Moral of the story, never loan out tools! Learned this as an auto mechanic many years ago. You can come over and use my tools or I can do the work for you/help you, but I NEVER loan out my toolsSent from my SM-N910V using TapatalkTiger Sales: AHP Distributor www.tigersalesco.comAHP200x; AHP 160ST; MM350P, Spoolmatic 30A; Everlast PowerTig 185; Thermal Dynamics 60i plasma. For Sale: Cobra Mig 250 w/ Push-pull gun. Lincoln Wirematic 250 |
|
发表于 2021-8-31 16:58:43