|
|
Picked up this guy on ebay. Its an old airco HF unit. Need some info on it maybe a manual but I couldnt find one on mllers website. Anybody have one of these or one similar?
Reply:cant get the pics to show up.Vantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.
Reply:The Airco and Miller boxes share the same part numbers. My Airco is a HF-15-1 and does not have the water, gas, and remote connections.
Reply:Its a hfas-1. No gas or contractor controls. Can I scratch start for aluminum? Ive never tried it before.
Reply:High frequency means that you won't have to scratch start the arc. It will jump across the gap on its own when set to AC.
Reply:Ok so I have my lincoln ranger 250 my airco hf box and torch. Is it necessary for me to get a hand amp control? Seems dangerous to keep that torch hot with ac hf all the time.Lincoln Ranger 250 GXTLN-25Lincoln Magnum SG and ModuleAirco HF BoxMiller 304 XMT CC/CVMiller 60 Series FeederMiller Syncrowave 250O/A SetupIt's a dog eat dog world and i'm wearing milkbone underwear
Reply:Grats Cart boy!Buy American, or don't whine when you end up on the bread line.
Reply:What you talkin bout willis?Lincoln Ranger 250 GXTLN-25Lincoln Magnum SG and ModuleAirco HF BoxMiller 304 XMT CC/CVMiller 60 Series FeederMiller Syncrowave 250O/A SetupIt's a dog eat dog world and i'm wearing milkbone underwear
Reply:What you talkin bout willis? |
|
发表于 2021-8-31 23:29:44