Service van rack

admin

I made this rack to hold all the various electrical boxes I carry so I could get to them easier and also know what I have at a glance. The old system was plastic totes which were a pain to get to (stacked 4 high) and never knew exactly what I had which led to running out and over buying on some stuff. I made a sliding part for the front out of 1/2" angle and some scrap 1/2" square tubing that drops down and keeps everything from falling out while under way. A sliding bolt holds it up for access. The top tray has 1.5" angle all around and is for staples, wire nuts etc.Just need a lable maker and it's done. Now I need to come up with ideas to get the side bins and shelving organized better and easier to get to stuff on the bottom, also speed bump proof it all.Last edited by bigb; 01-15-2012 at 11:20 PM.Miller Challenger 172Miller Thunderbolt AC/DC 225/150Miller Maxstar 150 STLVictor 100CVictor JourneymanOxweld OAHarris O/ASmith O/A little torchNo, that's not my car.
Reply:Looks pretty good. So looks like there is a set of face bars that slide up or down to block and unblock the bins?"The things that will destroy America are prosperity at any price, peace at any price, safety first instead of duty first, the love of soft living and the get rich quick theory of life." -Theodore Roosevelt
Reply:Originally Posted by SandyLooks pretty good. So looks like there is a set of face bars that slide up or down to block and unblock the bins?
Reply:looks good!!