Made a glove holder/dispenser

admin

While walking around harbor freight I saw a glove dispenser that clips to the side of your toolbox and I thought it was cool, but $15 I didn't like. Figured I could make one with the HF 18" little brake/hand press I have. Got a piece of 22g 12"x24" for another project and decided I wanted to use it for this instead. Sat down and ate dinner with a ruler, pencil, straight edge and box of gloves. Measured it all out and made some bends, cut it with the plasma cutter. Made 2 holes and used 2 wood screws and secured it to the side of my wooden cabinet. (my hand is covering up a windows XP code lol) It's not 100% done, I want to paint it and find a way to smooth out the edges some more. Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer
Reply:Dear god, dont let my pain in the *** painter at work see this. I will be building him one out of aluminum. If you cant fix it with a hammer, it must be an electrical problem."Boy, everyone starts with a full bag of luck and an empty bag of experience. The trick is to fill the bag of experience before the bag of luck is empty."-Grandad circa 1990ish