|
|
http://kansascity.craigslist.org/tls/2433791226.htmlWhat would be a fair price for this welder??? and would it be a decent welder for tig and stick? I seen a new 250 and it said it would arc gouge would this one be able to do that?
Reply:Mine is an older model HF and I paid 550 dollars. That was with water cooled tig torch, 2 foot pedals, generic water cooler system, full argon bottle and kinda short stick leads.I got on it quick when I saw it because got beat out on another welder before. Guy said he was getting 5 or 6 calls a day before he pulled the ad.They are heavy and suck a lot of power. But it runs 6010 and 7018 sweet as can be. I haven't tigged much with it, just to try it out. But I'm sure Dialarcs have made miles of tig welds.The inverters or a syncrowave would be a much better tig machine but unless you've got the skills to match mostly wasted features.If it comes with the accessories it'll be worth a pretty good buck. But if not it'll cost you quite a bit to outfit it piece by piece. Make sure you have the means to load and unload it and the power to handle it.AlA man is judged by what's between his legs...always ride a good horseMiller DialArc HFLincoln Classic 300DThermal Arc 181iPowermax 45Scotchman Ironworker(2) BridgeportsOkomota Surface GrinderAutoCAD 2010
Reply:I got my Dialarc HF-P with water-cooled torch, MIC-4 Solid State converter, foot pedal, hand control, homemade coolant system, short junky leads, random consumables, and a bottle of Argon for $1,000. That was about 5 yrs ago. It was an OK deal, but not a smokin' deal.
Reply:i paid $350 for mine and it came with the factory cart and 25' leads. I don't think it was ever used. No tig stuff.Lincoln 300 Vantage 2008300 Commander 1999SA250 1999SA200 1968Miller Syncrowave 200XMT350MPA/S-52E/xr-15Xtreme 12vs Millermatic 251 w/30A Millermatic 251 Dialarc 250 Hypertherm 1250 GEKA & Bantom Ironwokers
Reply:That's a newer model one, its at a fair price, $500 would be a great deal if all the tig accessories are included. else $750 would be good price. figure a bottle new is going to run $200 If its a decent sized one say 80-125CF and about $50 to fill with argon..I have had 2 Dialarc. weld very nice with stick and CV mig spoolgun that I ran. never tried tig cuz they didnt have HF. one of the most reliable welders ever madeLast edited by soutthpaw; 06-11-2011 at 07:58 PM.Tiger Sales: AHP Distributor www.tigersalesco.comAHP200x; AHP 160ST; MM350P, Spoolmatic 30A; Everlast PowerTig 185; Thermal Dynamics 60i plasma. For Sale: Cobra Mig 250 w/ Push-pull gun. Lincoln Wirematic 250 |
|
发表于 2021-8-31 23:26:39