miller syncrowave 351 tig pedals

admin

so far I have only seen two options the miller foot pedal and one by ssc controls, I only have a finger tip now and the son needs a foot pedal to get real good with aluminum I guess so......are there any other pedals out there, no one stocks them from anyone in all of atlanta, so I have to order it,, seeing how I have to order one, I might as well do a bit of research and see what is best, and where to save a few bucks,  Of course I will at least call my local welding place I use and ask them a price on the pedal I decide to buy, still thought it a good idea to double check here fisrt miller? SSC others? thanks!Miller Syncrowave 351, PC-300, WP18 Torch, Tec Spot Torch, Stick Hypertherm P/M 1000, 4*8 cnc plasma/router tablemiller 12vs extreme - might sell after 350pThe next lines left empty for more tools, P.S. Don't tell the wife
Reply:Ebay. Why don't you buy a used one?It is just an RFCS-14. I have seen them less than $50 at times.Weld like a "WELDOR", not a wel-"DERR" MillerDynasty700DX,Dynasty350DX4ea,Dynasty200DX,Li  ncolnSW200-2ea.,MillerMatic350P,MillerMatic200w/spoolgun,MKCobraMig260,Lincoln SP-170T,PlasmaCam/Hypertherm1250,HFProTig2ea,MigMax1ea.
Reply:Originally Posted by shovelonEbay. Why don't you buy a used one?It is just an RFCS-14. I have seen them less than $50 at times.
Reply:Id take the ssc pedal over miller or flea bay any day. They are more sensitive and very responsive compared to the other units. They have quick shipping and make a great heavy duty product.
Reply:Originally Posted by ttmso far I have only seen two options the miller foot pedal and one by ssc controls, I only have a finger tip now and the son needs a foot pedal to get real good with aluminum I guess so......are there any other pedals out there, no one stocks them from anyone in all of atlanta, so I have to order it,, seeing how I have to order one, I might as well do a bit of research and see what is best, and where to save a few bucks,  Of course I will at least call my local welding place I use and ask them a price on the pedal I decide to buy, still thought it a good idea to double check here fisrt miller? SSC others? thanks!
Reply:SSC makes them for ThermalArc. I have one on mine and indeed it works great. I did have to add a heel clip.Weld like a "WELDOR", not a wel-"DERR" MillerDynasty700DX,Dynasty350DX4ea,Dynasty200DX,Li  ncolnSW200-2ea.,MillerMatic350P,MillerMatic200w/spoolgun,MKCobraMig260,Lincoln SP-170T,PlasmaCam/Hypertherm1250,HFProTig2ea,MigMax1ea.
Reply:Originally Posted by shovelonSSC makes them for ThermalArc. I have one on mine and indeed it works great. I did have to add a heel clip.
Reply:any one with a heel tab.  You are constantly chasing the pedal without it.Buy American, or don't whine when you end up on the bread line.
Reply:Originally Posted by WeldingMachineany one with a heel tab.  You are constantly chasing the pedal without it.
Reply:ordered the SSC, I know no heel lip on it, but I can make one  this will be used mostly at a bench anyhow, they have blems for 159.....  I ordered a blemished modelguy was great on the phone telling me where all the parts came from for itMiller Syncrowave 351, PC-300, WP18 Torch, Tec Spot Torch, Stick Hypertherm P/M 1000, 4*8 cnc plasma/router tablemiller 12vs extreme - might sell after 350pThe next lines left empty for more tools, P.S. Don't tell the wife
Reply:Originally Posted by ttmordered the SSC, I know no heel lip on it, but I can make one  this will be used mostly at a bench anyhow, they have blems for 159.....  I ordered a blemished modelguy was great on the phone telling me where all the parts came from for it