Finished the Smoker

admin

It's Done!! The smoker we have been building in our metal shop classes at the high school is painted, assembled and ready to burn in!!  A little assembly drama at the end but I think everything worked out OK.  The kids did a great job on it and should be proud of themselves.  Hope you enjoy. Attached Images
Reply:Excellent! Now I'm hungry... "Every choice you make will effect at least one other person"
Reply:When's supper?  Anybody seen my 15/16" bent combo-wrench? Attached ImagesCity of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:And proud they should be, job well done. And clean! Very nice.For a little side question. How did you get your pictures to post side by side?And be sure to tell 'em they did a nice job.How do you know the blacksmith's dog? When you hollar at him he makes a bolt for the door!
Reply:Nice!Heavy Metal Fabricationhttp://heavymetalfabrication.comhttps://www.facebook.com/heavymetalfabrication
Reply:That's sweet!  I love the hardwareBuy American, or don't whine when you end up on the bread line.
Reply:How much was the door cord? how much did you end up getting?and by the way, I'm super jelous. Not only did you get yours done quicker and cleaner, you got other people to build it for you.They did great work, I hope they all got A's.There are no problems. There are only solutions. It's your duty to determine the right one.Hobart Handler 210Airco 225 Amp MSM Stinger
Reply:The Gasket is from Mcmaster CarrHere is the linkhttp://www.mcmaster.com/For some reason the link is not working, just search tadpole gasket and it will take you right to it.It has a 5/8 Bulb and 1.1/2" Width   $2.45 per footI got a 25' roll and used up most of it.  I used a leather punch to start holes in it for the bolts to go through.  Make sure you leave a gap for the gasketbetween the door and the cabinet, we did not and hav had a heck of a time getting it all to close tight.  It is actually to tight and we are warping the door to pull it in flush.  Hindsight is 20/20, and we learned from our mistakes!
Reply:very nice