|
|
my regulator reads over 200 psi on bottle pressure when bottle is opened. when i attempt to adjust delivery flow on acetylene, the reg. bumps and bottle pressure goes to 0 psi and nothing comes out torch. just exchanged bottles, so i know it's full. what might be problem. i am pretty new with all this.
Reply:Go here and read the threads. If your question isn't answered here post it again, but read what is there.And, welcome to the forum!Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money. -Cree Indian ProverbSA 200 LincolnVictor Torches
Reply:Your regulator needs to be taken apart and cleaned. There's something in there (insect nest?) that allows a teeny bit of pressure to get through initially (thus the tank gauge reading) but as soon as gas flows the obstruction blocks flow entirely, letting the gauges go to zero.that's my guess anyway -- for sure, it needs servicing. metalmagpie |
|
发表于 2021-8-31 23:22:15