Warn PullZall Winch ????????????

admin

(Not sure of the correct placement for this thread ?) I'm looking into one/few of these things, my company does some rigging on the side and in the shop. A standard come-along is good and reliable, but we want productivity. Does anyone have experience with one of these? Are they reliable? Worth the money? Can they take a beating? Proverbs 4:23My company welds.
Reply:Needs a remote. I don't like the idea of standing right behind something that could snap right back at you.
Reply:I have one I have run faily hard holding up well.
Reply:not for overhead liftingVantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.
Reply:Originally Posted by TSCGG13 I don't like the idea of standing right behind something that could snap right back at you.
Reply:Anybody can push a button, get one of these! http://unirope.com/more-hardware/tirfor-hoists-rope/ Attached ImagesDon’t pay any attention to meI’m just a hobbyist!CarlDynasty 300V350-Pro w/pulseSG Spool gun1937 IdealArc-300PowerArc 200ST3 SA-200sVantage 400
Reply:We do, we've got four...  Originally Posted by CEPAnybody can push a button, get one of these! http://unirope.com/more-hardware/tirfor-hoists-rope/
Reply:the tirfor winches are the bee's kneesVantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.