We need an ice cream scoop dipping well TODAY...

admin

One of my best customers called to tell me they needed a dipping well installed by Monday per the health inspector. Ok I call around not one with in 200 miles of me great I guess I have to make one let me see do I have material? Great here is some 18 gauge stainless here is a foot of schedule 40 1 1/4 pipe ok let's get started. Am I the only one that gets these crazy requests and completes them? Still a little sanding and polishing to do but for the most part done.
Reply:Looks good...... work on that punctuation..... it will make your post easier to read..lets eat grandpa......let's eat, grandpa.......Precision TIG 185 and MP 210Bobcat 225NTCutmaster 42O/A tanks.... 2 Argon tanks...... 2 C25 TanksFacebook...... F2 Metal WorksETSY....... https://www.etsy.com/shop/F2MetalWorksF2MetalWorks.com....... http://www.f2metalworks.com/
Reply:There's a reason why seamless SS sinks are used and this is an example.Apparently the inside weld areas of all the joints in this sink are not finished, etc.That's not acceptable for a sink, period.It appears that the drain outlet may be setup for air gap drain, if so--good.http://weldingweb.com/attachment.php...1&d=1344742421 Attached ImagesBlackbird