Which auto darkening replacement lens??

admin

I know that this has probably been mentioned or discussed on here before but after about an hour searching here and the web I still don't have an answer. So what I'm planning on doing is buying a pancake hood but I want to put an auto darkening lens in it. I'm not sure which pancake hood to buy as they have like 50 different types with different "add on's". I'm right handed as well if that helps any. I would like to know which auto lens will fit in it and would prefer a shade 9 or 10 as well as which one holds up the best and has the best clarity and functionality. Links on where to get these would be greatly appreciated as well as some money saving tips as I'm working on a fixed budget right now. Thank you. -Bryan1973 Lincoln SA 200, Already replaced shunt coils, Idle board (SOLD)1984 Miller Dialarc 250HF, Miller water cooler, 250 AMP water cooled torch, you know the worx.
Reply:why is it you want a pancake hood ?Miller Xmt 350Lincoln Ln-25Ahp 200xSmith Gas Mixer AR/HTig is my Kung FuThrowing down dimes and weaving aboutInstagram http://instagram.com/[email protected]
Reply:Why is it I see guys laying down a smoke screen with these diesel pickups Is there a special chip needed to make it over fuel like that, or just a heavy foot?Back in the day, when I drove for a living, you'd get a good talking to, or fired, if your boss saw black smoke rolling outta the stack on your rig as you were driving.  It meant you were too lazy to shift down when needed, and were lugging the engine.  Just about the worst thing you can do is to lug an engine, it all comes home to roost when you have to replace the bottom end.You should never see black smoke coming out of a diesel engine."Any day above ground is a good day"http://www.farmersamm.com/
Reply:Originally Posted by farmersammWhy is it I see guys laying down a smoke screen with these diesel pickups Is there a special chip needed to make it over fuel like that, or just a heavy foot?Back in the day, when I drove for a living, you'd get a good talking to, or fired, if your boss saw black smoke rolling outta the stack on your rig as you were driving.  It meant you were too lazy to shift down when needed, and were lugging the engine.  Just about the worst thing you can do is to lug an engine, it all comes home to roost when you have to replace the bottom end.You should never see black smoke coming out of a diesel engine.
Reply:Originally Posted by WeldingWookiewhy is it you want a pancake hood ?
Reply:I believe arc one and miller both make decent lenses that fit into a standard helmet...come to think of it, my arc one conked out on me the other day (about 4 years old!)  That was exciting.
Reply:Originally Posted by TuscanyWtf does that have to do with the question asked In the op?  Nothing if you can't add to the subject matter of the thread the gtfo. And you obviously know nothing about a diesel for that matter so don't comment on something you have no clue about.
Reply:Originally Posted by empirewelding@tuscany if you want people to answer your questions don't be a dick all he did was make an observation.  you think you'll be a pipeline welder with thin skin like that.