Mith Gauges

admin

Hi Everybody;I would like to ask one and all this question?I bought a millermatic 130 and got a small tank,and smith 30-100-320 Gauges.I send an email to "Smith Gauges" to ask if i could use this gauges for mig co2/argon/Reply : if you don't need more than 100 psi it should work!Question - i don't use 100 psi do I for mig welding Do I ?please reply!!Last edited by lakehunter; 06-19-2012 at 06:29 PM.Reason: Header--Smith not Mith
Reply:You don't need over 100 psi shielding gas for your MIG.Mark
Reply:I thought after I posted, but the outlet side of your regulator should be CFH (Cubic Feet per Hour) not PSI. In my very limited experience 15 to 25 CFH seems to work for me.Hope it helpsMark