vehicle vice

admin

heres a project my boy did for when we go overlanding in 2yrs time.it fits onto front mounted tow ball fitting,we fitted it drivers side as when in europe that will be the side farthest from rd. no welding to show as he welded receiver sect to bumper ages ago.
Reply:forgot pics sorry Attached Images
Reply:Nice sweaterRanger 305gMillermatic 140 AutosetDewalt Chopsaw2 grindersMy Fists
Reply:he wears it in workshop just so he can tell his tell his 11 yr old sister he wears jumper she made him.
Reply:Record vise?"USMCPOP" First-born son: KIA  Iraq 1/26/05Syncrowave 250 w/ Coolmate 3Dialarc 250, Idealarc 250SP-175 +Firepower TIG 160S (gave the TA 161 STL to the son)Lincwelder AC180C (1952)Victor & Smith O/A torchesMiller spot welder
Reply:never looked 1 of 6 i pulled from skip when they shut local school, along with other bits
Reply:Nice job!Personally I don't hold onto anything being drilled. I ALWAYS clamp the part if it doesn't fit in the mounted vise. To be able to move the vise around without moving the drill table get a cheap x-y table.
Reply:Excellent Job Naughtyboy Just remember to take it off when your travelling I had a Series 3 many moons ago and the times i could of done with a gadget like that, I don't think sticking in from of my disco 2 has the same effect