Discuz! Board

 找回密码
 立即注册
搜索
热搜: 活动 交友 discuz
查看: 11|回复: 0

Smith Regulator doing weird stuff

[复制链接]

9万

主题

9万

帖子

29万

积分

论坛元老

Rank: 8Rank: 8

积分
293221
发表于 2021-8-31 23:07:05 | 显示全部楼层 |阅读模式
Ever seen this before? Quick fix? Or warranty exchange? By the way, it's a C25 mixture, and starting doing it just after the second bottle hookup.Miller Bobcat 250Syncrowave  200Millermatic 252Spoolmatic 30ASpectrum 625 X-TremeMaxstar 150SVictor O/A torchesDewalt angle grindersWelded on/off for over 40 years.
Reply:I would test while running a weld bead.Dynasty 200DXPassport plus w/ spoolmate 100victor 315c oxy/(act and prop)Miller digital elitemilwaukee power tools
Reply:I had the same problem with argon regulator. I closed the bottle, then opened it again and the problem was gone. Weird anyway...
Reply:I tried that too muliple times. I even disconnected the line to the welder to see if there was something going on there. Nope. Problem still there. I tried manually regulating the main valve to vary input pressure into the regulator, and discovered it would act up at only over 1300 psi.Miller Bobcat 250Syncrowave  200Millermatic 252Spoolmatic 30ASpectrum 625 X-TremeMaxstar 150SVictor O/A torchesDewalt angle grindersWelded on/off for over 40 years.
Reply:Problem resolved. Miller sent me a new regulator and says the problem is rare. Can't believe how fast they got me the new regulator. I guess it's my reward for not falling for ultra-cheap foreign made welding equipment.Last edited by Gobysky; 08-09-2012 at 08:40 AM.Reason: clumsy fingersMiller Bobcat 250Syncrowave  200Millermatic 252Spoolmatic 30ASpectrum 625 X-TremeMaxstar 150SVictor O/A torchesDewalt angle grindersWelded on/off for over 40 years.
Reply:My TIG regulator did something similar awhile ago after getting a new bottle of argon. Didn't make noise and jump as bad but the low pressure needle would vary up and down as it flowed. Turned out I had moister/condensation in the regulator somehow. Either from the bottle of new argon or got in the regulator when it was off the bottle. After pulling the regulator apart and cleaning it all out it has worked fine again ever since.
Reply:Sounds like ya got bad gas! I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|小黑屋|DiscuzX

GMT+8, 2025-12-28 04:21 , Processed in 0.283805 second(s), 19 queries .

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表