Discuz! Board

 找回密码
 立即注册
搜索
热搜: 活动 交友 discuz
查看: 11|回复: 0

New Here, First Post, some practice welds

[复制链接]

9万

主题

9万

帖子

29万

积分

论坛元老

Rank: 8Rank: 8

积分
293221
发表于 2021-8-31 23:05:47 | 显示全部楼层 |阅读模式
Hello all, look alot at forum but this is first post ever. Nothing special just thought I would share for my first post. Just some practice weld coupons of aluminum, titanium, and inconel 625. I am a learning welder at a small aviation shop. These are practice welds for some minor certification through my work. Have not seen a whole lot of full pen AL. Butt welds here so thought maybe would be good first post. All welds far from perfect as I said I am learning but all I have to show for myself for the time being.       On another note really enjoy the site and most posts, pipe stuff is amazing as well as most stuff from the main guys here. Really enjoy the cast repairs as well, good stuff to know. So here is pics of practice tries before I actually submitted coupons to x ray. Fronts and Backs. Most 1/16th red, ti had big gas lens, 3/32 blue on AL. All back purged, machine sync 200. Thanks Attached Images
Reply:A Few More. Thanks Attached Images
Reply:Golf clap.Miller Dynasty 200DXMiller Spectrum 250DMiller Millermatic 200Bunch of old blue dinosaurs....
Reply:Welcome.Not bad for just practicing. You working to AWS D17.1?Just a note. You don't need backpurge on alum.Weld like a "WELDOR", not a wel-"DERR" MillerDynasty700DX,Dynasty350DX4ea,Dynasty200DX,Li  ncolnSW200-2ea.,MillerMatic350P,MillerMatic200w/spoolgun,MKCobraMig260,Lincoln SP-170T,PlasmaCam/Hypertherm1250,HFProTig2ea,MigMax1ea.
Reply:Ummm....Your Aluminum welds are better than mine and I've been practicing for a year.Which machine?  What settings?TA Arcmaster 300CM3XMT 304S22P12 suitcase feederX-Treme 12VSOptima pulserTA161SMaxstar 150STLHypertherm PM45OP setupStihl 020AVP, 039, 066 Magnum
Reply:Hello, yes shovelon we are using AWS d17.1, you are right about the back purge on aluminum, but I figured what the heck, Drf 255 thanks for the compliment, the machine I used was a synchro wave 200, 3/32" blue lanthanated tungsten, ac balance I believe was 80 or 85, 4043  3/32 filler, max amps somewhere around 120 amps, foot pedal, argon at 18-20 cfh.
Reply:Keep it up.. looks goodMiller Pro 300 SS w/ cat Miller Bobcat 250Miller Diversion 165 Miller 211Miller Xtreme 375Miller 12vsMiller Dynasty 200 DX Miller Passport Plus w/ Spool GunMiller 30a spoolmaticLincoln AC225 Buzz Box VictorMathey Dearman - H&M
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|小黑屋|DiscuzX

GMT+8, 2025-12-28 06:24 , Processed in 0.109966 second(s), 18 queries .

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表