Good Place for Tubing?

admin

Im about to start on the winter project that will be dealing with a lot of 304 S.S. and I have been searching everywhere for a good supply store for tubing. Jegs has very decent prices and is about the lowest I have come across so far. Just wondering where everyone else is getting their straights, elbows etc.  This project will be anywhere from 2" to 5", but the 5" is only the turbo outlet that will run straight into 4" exhaust.Thanks in advance,Kyle
Reply:Try www.mandrel-bends.com and www.coneeng.com and check out www.racepartsolutions.comAWS 17.1, D1.1 and ASME IX (GTAW)Miller Syncrowave 350LX, Maxstar 150sth, Maxstar 200DX and  Millermatic 252 w/ Spoolmatic 30aMiller buzz box with Lincolin TombstoneThermal Dynamics Cutmaster 38
Reply:Acestainless.com or burnsstainless.com?Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer
Reply:Check out Alaskan Copper & Brass, they aren't necessarily automotive oriented but might be a bit more reasonable on price. Best regards, Allanaevald
Reply:I'm just putting this here because you need at least one person per thread that doesn't offer anything useful to the conversation...GravelThe difference between theory and practice is that in theory there is no difference.
Reply:Originally Posted by GravelI'm just putting this here because you need at least one person per thread that doesn't offer anything useful to the conversation...
Reply:Originally Posted by going nowhereyou could've just waited for burpee to reply...