Harley always has a place in my garage...........

admin

I have had this rear wheel from a 2006 Road King in my attic for a few years.......... an unused  part from a Harley Build I started in 2009 and then sold in 2011......Today I found a home for it........ to go along with my 2007 Softail Custom...... to be a place to wrap my air hose......Pics of the wall mount weld out........backside and front side..... Attached ImagesPrecision TIG 185 and MP 210Bobcat 225NTCutmaster 42O/A tanks.... 2 Argon tanks...... 2 C25 TanksFacebook...... F2 Metal WorksETSY....... https://www.etsy.com/shop/F2MetalWorksF2MetalWorks.com....... http://www.f2metalworks.com/
Reply:and pics of the mounted assy..... Attached ImagesPrecision TIG 185 and MP 210Bobcat 225NTCutmaster 42O/A tanks.... 2 Argon tanks...... 2 C25 TanksFacebook...... F2 Metal WorksETSY....... https://www.etsy.com/shop/F2MetalWorksF2MetalWorks.com....... http://www.f2metalworks.com/
Reply:Pretty nifty hose hanger.Up for a challenge? Make it like a hose reel. Modify your mount with a hinge so it can swivel from flat against the wall (like it is now) to any direction in the shop, install an air swivel and a short length of hose... then you can unwind it and wind it back up on/off the wheel. Adding a handle would make reeling it up faster yet.
Reply:The stripes are a couple years old........ I painted them before I became addicted to tools and welding......Precision TIG 185 and MP 210Bobcat 225NTCutmaster 42O/A tanks.... 2 Argon tanks...... 2 C25 TanksFacebook...... F2 Metal WorksETSY....... https://www.etsy.com/shop/F2MetalWorksF2MetalWorks.com....... http://www.f2metalworks.com/
Reply:Don't spin it to fast or the spokes will fall out www.georgesplasmacuttershop.comPlasma Cutter and Welder Sales and Repairs--Ebay storeTec.Mo. Dealer Consumables for the PT and IPT torch's
Reply:Pretty cool, looks like once you get it started you could spin it to roll it up.I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:Great job, Fexal! No spare Harley rims here, but I do have a spare rim off an old mustang. And I need a hose reel. I think you just inspired me!PapaLincoln Idealarc 250 (circa 1962)Lincoln Weldpak 155 w/Mig KitLincoln Squarewave TIG 175
Reply:Love it!-AaronJet 17.5" Drill Press1942 South Bend 16x84 Lathe1980s Miller 320A / BP --- 2013 Power Mig 2562012 Jet 7x12 Horizontal BandsawVictor O/A Setup
Reply:Here's a use for an old bicycle wheel and tire.