Stair railing

admin

I have a neighbor lady that is coming home from the retirerment home after she had hip replacement. Her house has two steps from the garage to the kitchen..I came up with this.. had a pair of hand railings laying around cut one down to fit the right length and welded a 2 x 24inch 3/16 flat to the back of it after I put a angle on the horizontial pieces. I put three 5/16 holes in the flat and the two on the vertical plate already on the bottom. I tig welded it together with 70S2 filler 3/32 at 150amps running the pedal so cant tell you specific amps. I didnt get a pic of the welds the carpenter stopped and picked it up before I got back from getting more batteries for my camera.. Anyway my good deed for the week. Iam paying it forward cuz I hope to get old someday and may need a hand myself!!. Thanks Dale Attached ImagesLast edited by power; 02-02-2013 at 11:57 PM.Miller 250DX HTP 221 DV AC/DCHenrob O-A Miller 180 MigMiller 150 Inverter   Hobart 10,000 Welder-Generator   Have a good day!!!
Reply:That's nice of you.I'm sure she appreciates too.
Reply:Thanx Guys, Ya It makes me feel better about myself if that makes sense? Took me alittle time and some scrap hand railings is all. Ran into the carpenter today that installed it said made the gal real happy..Miller 250DX HTP 221 DV AC/DCHenrob O-A Miller 180 MigMiller 150 Inverter   Hobart 10,000 Welder-Generator   Have a good day!!!
Reply:I appreciate your work. nicehttp://www.lemondtrainer.com
Reply:Looks good!Always nice to help...