Self Balancing Wine Bottle Holder

admin

This was done a couple of days ago for a valentines day present. Was made with mostly scrap pieces laying around. Sorry I didn't have any pictures before it was powder coated, it was all rushed. But here's the final product in use ... well looks like the bottle may have been used aswell  Attached Images
Reply:That is cool..........If the bottle is full and heavier........... does it want to tip over or does it still balance correctly?Precision TIG 185 and MP 210Bobcat 225NTCutmaster 42O/A tanks.... 2 Argon tanks...... 2 C25 TanksFacebook...... F2 Metal WorksETSY....... https://www.etsy.com/shop/F2MetalWorksF2MetalWorks.com....... http://www.f2metalworks.com/
Reply:Still balances perfectly  The square tubing could be much thinner and smaller. Just what I had laying around to turn it around quickly.
Reply:Cool ! How many tries before you got it balanced ??     That looks like a short neck bottle. I may just try that.
Reply:First try. The hole center needs to be about 6.5-7" from the longest bottom edge. The cut angle can be from about 39-45 degrees. This one was cut at roughly 40 degrees. You'll need about 1-1/4" Hole or large to fit the bottle neck in there. I personally used a 1-3/8" -0.065" wall tube to go in there.
Reply:Obsession "symphony"....delicious.
Reply:That's about the same angle I use when chugging on a long-neck. "USMCPOP" First-born son: KIA  Iraq 1/26/05Syncrowave 250 w/ Coolmate 3Dialarc 250, Idealarc 250SP-175 +Firepower TIG 160S (gave the TA 161 STL to the son)Lincwelder AC180C (1952)Victor & Smith O/A torchesMiller spot welder
Reply:huh.. I don't get it
Reply:Originally Posted by herbet99huh.. I don't get it
Reply:Do you use it to store unopened bottles or do you use it after you've opened the bottle?
Reply:Its to display unopened bottles. the empty is there for demonstration purposes.
Reply:I was wondering how'd you poor with the holder around the neck
Reply:That is so simple it's freakin GENIOUS! I love it, awsome I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:I want to make a house warming gift for a women i work with. This is the ticket.Dave ReberWadsworth Ohio
Reply:Very nice, gonna make one or two
Reply:Here is my version. The gale at work liked it, my students saw the full wine bottle (with water) to act as weight and thought it was going to be an interesting day. Attached ImagesDave ReberWadsworth Ohio
Reply:Here's one that I tried. Used a couple RR spikes, scrap pipe,  1/4 x 3 flat stock,and stubs of 3/16'' rod. Just tacked ; didn't decide on type of finish. My first attempt at this art stuff Attached Images
Reply:I love it BDIDave ReberWadsworth Ohio
Reply:Thanks, I'm glad dj55b shared that. I'm just started this art adventure. I enjoy using up my small scrap material.
Reply:Glad to hear you guys are enjoying this  I have plans for a more elaborate one later on ... i'll keep it a secret for now
Reply:Originally Posted by ReebsHere is my version. The gale at work liked it, my students saw the full wine bottle (with water) to act as weight and thought it was going to be an interesting day.
Reply:Originally Posted by BD1Here's one that I tried. Used a couple RR spikes, scrap pipe,  1/4 x 3 flat stock,and stubs of 3/16'' rod. Just tacked ; didn't decide on type of finish. My first attempt at this art stuff
Reply:Hey BD1, mind if I copy your idea? I'm sure my wife would like one as a conversation piece.I like itLast edited by WeldRite; 03-01-2013 at 03:32 PM.
Reply:Originally Posted by WeldRiteHey BD1, mind if I copy your idea? I'm sure my wife would like one as a conversation piece.I like it
Reply:This idea is so cool that I made 5 of them today.......... but just a little different.......The OP is GENIUS!My twist on the idea....... Attached ImagesPrecision TIG 185 and MP 210Bobcat 225NTCutmaster 42O/A tanks.... 2 Argon tanks...... 2 C25 TanksFacebook...... F2 Metal WorksETSY....... https://www.etsy.com/shop/F2MetalWorksF2MetalWorks.com....... http://www.f2metalworks.com/OK FexalDimesions please!!!!!!!!Will it sand with one bottle in either hole? I like it.Dave ReberWadsworth Ohio
Reply:Reebs........It is 10" long from the longest edge.........  Inch and a half square tube........ Holes are centered at 5.5" and 8.75"...... (9"would work too).........The angle is 40 degrees.......It will work with one bottle in the bottom hole....... But not in the top..........Precision TIG 185 and MP 210Bobcat 225NTCutmaster 42O/A tanks.... 2 Argon tanks...... 2 C25 TanksFacebook...... F2 Metal WorksETSY....... https://www.etsy.com/shop/F2MetalWorksF2MetalWorks.com....... http://www.f2metalworks.com/
Reply:Thanks I will put that on my to do listI wish I had a good avenue to sell crap like this, people seem to like it.Dave ReberWadsworth Ohio
Reply:ok FEXAL now look what you made me do. After drinking all this wine, this happened. Attached Images
Reply:Bwah ha ha.......That is awesome!Precision TIG 185 and MP 210Bobcat 225NTCutmaster 42O/A tanks.... 2 Argon tanks...... 2 C25 TanksFacebook...... F2 Metal WorksETSY....... https://www.etsy.com/shop/F2MetalWorksF2MetalWorks.com....... http://www.f2metalworks.com/
Reply:Originally Posted by dj55bYou stole the one that I did ... didn't you :P
Reply:Hey Flex, is the "Armageddon!!!!" in your sig from that radio gag with the "Ragged", the Gerbil?200amp Air Liquide MIG, Hypertherm Plasma, Harris torches, Optrel helmet, Makita angle grinders, Pre-China Delta chop saw and belt sander, Miller leathers, shop made jigs etc, North- welders backpack.
Reply:I saw a single piece of wood but not metal . I did not see any that was a person type figure.
Reply:Originally Posted by bert the welderHey Flex, is the "Armageddon!!!!" in your sig from that radio gag with the "Ragged", the Gerbil?
Reply:BD1 That is great and looks painfulI used to make them form wood and use them in science class. Teach about center of gravity. METAL IS BETTER!!!!!!!!!!!Dave ReberWadsworth Ohio
Reply:Awesome bottle holders! Looks great, fun and very interesting. Most of all, great use of metal scraps. Way to go guys!
Reply:Originally Posted by FexalYessir........