Can you identify this cable?

admin

The black, flat, shaped plug goes to the MIG gun, the other black and white, round shaped, 2 pin plug goes to a machine. My question is "What Machine?"My Lincoln PowerMig 350MP has a 4 pin receptacle and the adapter is threaded onto the receptacle. If you can identify this adapter, maybe I can trade someone for the adapter I need.Thanks.Lincoln Power Mig 210MP MIGLincoln Power Mig 350MP - MIG and Push-PullLincoln TIG 300-300Lincoln Hobby-Weld 110v  Thanks JLAMESCK TIG TORCH, gas diffuser, pyrex cupThermal Dynamics Cutmaster 101My brain
Reply:I have a miller 180 and nothing looks like this on it...
Reply:It looks like the plug for older LN-25's and similar feeders. The adapter cable you want is a common one, but I don't know the part # off hand. If you download the Lincoln Magnum gun catalog, it's the one that comes with the "-6" adapter kit. The plug in your pic looks like the one from the "-10" kit.hth,JohnA few weldersA lot of hammersA whole lot of C-clamps
Reply:Well, I had a ranger 9 and an LN-25 that I traded to my buddy. I will go take a look at it next time I am there. But if anyone knows for sure, let me know?Lincoln Power Mig 210MP MIGLincoln Power Mig 350MP - MIG and Push-PullLincoln TIG 300-300Lincoln Hobby-Weld 110v  Thanks JLAMESCK TIG TORCH, gas diffuser, pyrex cupThermal Dynamics Cutmaster 101My brain
Reply:looks like you could use it to connect an automotive coil high voltage output to a usb slot on a misbehaving computer and blow the snot out of it....unless you just prefer to adjust it with a handsledge..
Reply:Lincoln gun toLN-7/8/9 feeders
Reply:Thanks 7A749!If you have one I need, wanna trade one out?Lincoln Power Mig 210MP MIGLincoln Power Mig 350MP - MIG and Push-PullLincoln TIG 300-300Lincoln Hobby-Weld 110v  Thanks JLAMESCK TIG TORCH, gas diffuser, pyrex cupThermal Dynamics Cutmaster 101My brain
Reply:7A749 Nailed it.   Lincoln Ln-series wire feeder to Tweeco mig gun adapterVantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.