This is my modification to the Harbor Freight welder cart. I used some 1"x1"x.125" tubing tor the entire rack. I had to add a piece of tubing under the welder to allow the gas hose to connect to the back otherwise it would hit the back lip of the shelf. The hooks are a little bigger than I would have liked but they were laying around. Might have to make some smaller ones with by bender one day. The sheet metal on top was meant to protect the welder but it comes in handy as an extra shelf. Attached Images
Reply:Nice cart i got one of them chicago electric palmsa cutters had for a year and has broke down yet im surprise and done alot alot of cuttingwith it nice job
Reply:I appreciate the reply. That was actually my first useful welding project.
发表于 2021-8-31 22:56:08