|
|
Goodmorning, everyone!!This is one of my newest videos, and it's a little crash-course in hardfacing with a stick welder...[ame]http://www.youtube.com/watch?v=Kmu_Wu58gN4[/ame]To be honest, its a little outside my area of experience, but I'd had a LOT of requests for a hardsurfacing video, so I researched it for hours, practiced a little, and put this together... Hopefully, if you're interested in hardfacing, this will be enough to get you started Anyway, this is one of those cases where a picture is worth a thousand words, but I'll do my best to describe it for anyone who cant/doesn't want to watch the video itself... I talk a little about what hardsurfacing is, and about preparation for the process... It goes over putting down a "buttering layer" of softer metal to act as a go-between for the softer base metal, and harder "cover layer", and also to repair the base metal... I even wear an apron in this video Just thought I'd share... Have an awesome Tuesday, everyone!! (I'll have more videos here soon... Although Im currently on "forced vacation" after damaging a camera during a welding shot... Best Buy has it now, the protection plan I bought with the camera covered the new lens, but it'll probably be a week until I can make more videos )[Account Abandoned 8/8/16 Please Do Not Attempt Contact Or Expect A Reply]. See you on YouTube! -ChuckE2009
Reply:I saw that video. It's a great video! Thank you. "Hey I didn't come to look and learn, I came to turn and burn.... If I can't light up, I'm gonna light out!"-JodyIdealarc 250 "Fatman"MM 252MM 211 "Little boy" Victor Torches
Reply:Thanks anvil!! Glad you like it [Account Abandoned 8/8/16 Please Do Not Attempt Contact Or Expect A Reply]. See you on YouTube! -ChuckE2009 |
|
发表于 2021-8-31 22:52:50