Little 4 inch fabrication project.

admin

Got some time away from the bigger pipe.  Two 4 in tandem t assembly's. they are bolted together in the picture getting hydro tested. Didn't get any fab pics just the one
Reply:Not to shabby at all. Raised face or rtj ring gaskets?
Reply:There are RF flanges. Don't use to many rtj flanges here. Few but far between.
Reply:Must be nice to be able to weld some decent pipe.
Reply:just kidding with ya man. Looks like a pretty fun job to me!
Reply:Ha ha yeah old pipe isn't as much fun. If its been in the ground and pigged it can be impossible almost. Magnetism can be a pain. A gauss meter makes it a breeze though.   Next project ill try to get you some fit and in between weld pics maybe help ya out a littleYou still practicing at it James? If ya lived closer I could get you some good pipe.Last edited by specopswelder; 08-21-2013 at 11:38 PM.
Reply:I used up all my pups. I need to take another hunk back to the machine shop to cut and bevel some more.Bout outta 1/8 rods too. Gonna get some 5ps and Excalibur too this time.