Another Lamp

admin

This is another lamp I  made for a friend from used up brake discs and 19mm diameter pipe.I tried DCEN, Hyundai 6013 2.5mm electrodes, around 90 amps. The welds are still hideous,as expected, due to the difference of metals, as explained to me in my previous posthttp://weldingweb.com/vbb/showthread.php...amp+from+scrapPaint was copper hammered look, electrocoated. I also added a dimmer to help her create atmosphere.Telwin Force 165 InverterDewalt abrasive chop saw
Reply:That lamp turned out great.PlasmaCam CNC cutterLathe and Band SawClamps
Reply:I like it. What did you use for the shade?Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer
Reply:That is very nice, really goes with her decor.
Reply:latzamanClose-ups of the work - or it's a real-estate promo.Opus
Reply:Thanks everyone.Actually, this is my living room, I was just trying it out. In the meantime, I have already deliveredthe lamp, so I asked my friend if she could send me some close-ups. Unfortunately, they are poor qualityiphone pictures.As for the shade, maybe you mean the cap, it is made of glass, ordinarily you install iton the ceiling but looking down. Here is a close-upIf I pay her another visit, I'll make sure to bring a camera with me.Telwin Force 165 InverterDewalt abrasive chop saw