|
|
Hello everyone. Have been lurking for many moons and decided to share some photos of a welding truck that recently passed through our small town. Very clean and well thought out.Last edited by 10th Man; 10-30-2013 at 09:59 PM.
Reply:Last edited by 10th Man; 10-30-2013 at 09:58 PM.
Reply:It's pretty, but it seems low on storage, bottle storage and tire clearance.
Reply:Very stylish, but looks like caskets to me. Too much wasted space. Just my opinion, but I like the workmanship.
Reply:Caskets? That must be where he sticks the people he catches messing with his truck. Its different but then again, I like things that are different.Last edited by tndude; 10-31-2013 at 01:44 AM.
Reply:I think it's awsome! He most likely lives out of hotels, and that's why everything is locked up in the storage boxes. Sad but true there's drug addicts everywhere.I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:Driving a bolt into the side of a HP cylinder to secure it is not cool! Otherwise nice looking truck.
Reply:Better not go off road at all, looks like it will shred the tries on the bedSent w/ Tapatalk using Swype, pls excuse typosTiger Sales: AHP Distributor www.tigersalesco.comAHP200x; AHP 160ST; MM350P, Spoolmatic 30A; Everlast PowerTig 185; Thermal Dynamics 60i plasma. For Sale: Cobra Mig 250 w/ Push-pull gun. Lincoln Wirematic 250
Reply:Originally Posted by 12345678910It's pretty, but it seems low on storage, bottle storage and tire clearance.
Reply:Looks like the oxygen is on its side in the box under the ice chest. He probably has air bags to raise the bed for more clearance. I like the wheels but I think at least one of the star silohettes should be the state of Texas. Whats that ground strap hanging off the back dragging in the dirt for? Lightning storms?The coffin storage is nice and he is using LINCOLN and some LINCOLNS are called Tombstones.Last edited by Insaneride; 10-31-2013 at 10:28 AM.
Reply:Originally Posted by weldermikeHe most likely lives out of hotels, and that's why everything is locked up in the storage boxes. Sad but true there's drug addicts everywhere.
Reply:Looks lik the delorian from back to the future to me....
Reply:nice workmanship.
Reply:Originally Posted by InsanerideLooks like the oxygen is on its side in the box under the ice chest. He probably has air bags to raise the bed for more clearance. I like the wheels but I think at least one of the star silohettes should be the state of Texas. Whats that ground strap hanging off the back dragging in the dirt for? Lightning storms?The coffin storage is nice and he is using LINCOLN and some LINCOLNS are called Tombstones.
Reply:I im not sure I like the coffin storage unless the plan was to tow a gooseneck 5th wheel. I've been getting closer to puting together another welding rig. For pipeliners what size leads do you run? And how much 150'? Does it really matter between 2/0 and 1/0?These are my old trucks I ran Tyrone and Brucester a 1990 Dodge Cummins with a tilting flatbed. Attached ImagesI'm going to do the thing that God put Galen Beasley on this Earth to do:Have Salon quality hair and weld.Nothing like a good cup of coffee and the smell of 6010 burning in the morning. 971-204-3444 cell API ASME Structural NDT and Repair
Reply:Tyrone was a gas V8 was not kind on the wallet plan on at least $20-$25 a day just to run around town. Brucester got in an accident last year severely bent the frame under the motor.This is the next one I am looking at. Unfortunately around here there isnt a big selection of flatbed trucks for sale.I could get a custom aluminum truck body made in southern oregon. I have been debating the best setup I like the pipeliner setup mostly because u can tow a 5th wheel trailer with it. Any suggestions? Attached ImagesI'm going to do the thing that God put Galen Beasley on this Earth to do:Have Salon quality hair and weld.Nothing like a good cup of coffee and the smell of 6010 burning in the morning. 971-204-3444 cell API ASME Structural NDT and Repair
Reply:Originally Posted by walkerDriving a bolt into the side of a HP cylinder to secure it is not cool! Otherwise nice looking truck.
Reply:Originally Posted by galencwiI could get a custom aluminum truck body made in southern oregon. I have been debating the best setup I like the pipeliner setup mostly because u can tow a 5th wheel trailer with it. Any suggestions?
Reply:I guess if all your doing is burning rod all day you dont need alot of storage. I have an 11' service body and still need more room.Disclaimer; "I am just an a$$hole welder, don't take it personally ."
Reply:[QUOTE=CEP;3233141]I think I know the outfit you're talking about. I can't find their web site in my bookmarks right now. I almost bought from them. Then I found this one in Eugene for $3,000.00. I'm not a rig welder, so just a flatbed works for me. Here's their website http://www.highwayproducts.comThey also make the pavati 4 door drift boats down there.www.pavatimarine.comThere's your plug for pavati! Attached ImagesI'm going to do the thing that God put Galen Beasley on this Earth to do:Have Salon quality hair and weld.Nothing like a good cup of coffee and the smell of 6010 burning in the morning. 971-204-3444 cell API ASME Structural NDT and Repair
Reply:Originally Posted by galencwiHere's their website http://www.highwayproducts.com
Reply:Ya I have the 2008 price list things have gone up a ways. Its not to expensive if you keep the options down with a base model flatbed.If I was thinking I should have got the box built then and I could have transfered it to the next truck. That's what I am going to do this time.Last edited by galencwi; 10-31-2013 at 05:14 PM.I'm going to do the thing that God put Galen Beasley on this Earth to do:Have Salon quality hair and weld.Nothing like a good cup of coffee and the smell of 6010 burning in the morning. 971-204-3444 cell API ASME Structural NDT and Repair
Reply:Blaser Trailer Sales in Eugene (541-688-7388) use to sell the Aluma brand. My bed weighs something 345-pounds. http://www.alumaklm.com/truck-beds/i...ruck-beds.html Attached ImagesDont pay any attention to meIm just a hobbyist!CarlDynasty 300V350-Pro w/pulseSG Spool gun1937 IdealArc-300PowerArc 200ST3 SA-200sVantage 400
Reply:Nice! Every 1000 pounds you save =1 mpg fuel savings. It all adds up!I'm going to do the thing that God put Galen Beasley on this Earth to do:Have Salon quality hair and weld.Nothing like a good cup of coffee and the smell of 6010 burning in the morning. 971-204-3444 cell API ASME Structural NDT and Repair
Reply:Originally Posted by galencwiNice! Every 1000 pounds you save =1 mpg fuel savings. It all adds up!what brand tuner do u recommendI'm going to do the thing that God put Galen Beasley on this Earth to do:Have Salon quality hair and weld.Nothing like a good cup of coffee and the smell of 6010 burning in the morning. 971-204-3444 cell API ASME Structural NDT and Repair
Reply:I have the Black Maxx, but it is discontinued. The EPA shut them down! So I guess now you can only buy the Mini Maxx or XRT PRO. EPA is really cracking down on these tuners now a days! http://www.hsperformance.com/products/Dont pay any attention to meIm just a hobbyist!CarlDynasty 300V350-Pro w/pulseSG Spool gun1937 IdealArc-300PowerArc 200ST3 SA-200sVantage 400
Reply:wtf happened there? they didnt bow down to pressure from the epa so they made them discontinue the black maxx? It must work Really Good!!! What's the difference between the black and the mini. lol no pun intended.I'm going to do the thing that God put Galen Beasley on this Earth to do:Have Salon quality hair and weld.Nothing like a good cup of coffee and the smell of 6010 burning in the morning. 971-204-3444 cell API ASME Structural NDT and Repair
Reply:Originally Posted by galencwiWhat's the difference between the black and the mini.
Reply:Nice truck but I wouldn't want to see it get tboned from the right side... BOOM |
|
发表于 2021-8-31 22:43:31