Look what I got for $75

admin

Not a bad find. this is the deep throat one, only had one band but it appears to be lightly used.  I also like the fully adjustable speed, sweat!!!
Reply:Ya got a pretty good deal, considering it is $300 new and you got the steel case to which is a bonus. I love mine and use it just as much if not more than my plasma, they just keep on taking abuse. Have fun with it and use it to its full potential.Miller Dynasty 300dxSpeedglas 9002XMiller Spectrum 375 XtremeLincoln PowerMig 255xtLincoln PowerMig 140cMilwuakee Portaband
Reply:Nice score!!!!!Lincoln 300 Vantage 2008300 Commander 1999SA250 1999SA200 1968Miller Syncrowave 200XMT350MPA/S-52E/xr-15Xtreme 12vs Millermatic 251 w/30A  Millermatic 251 Dialarc 250 Hypertherm 1250 GEKA & Bantom Ironwokers
Reply:I'm envious. I'd love to have one of those but I can't justify the cost of a new one now, I would only use it once in a great while. Finding anything used in my area is a waste of time. It's either worn out or cheap Chinese junk to start with. I've been considering getting a HF one and hope it will stand up to the very occasional use it will get. I have done that very thing with a biscuit joiner and also an air cutoff tool I bought to do one job each. Both off the darn things have done several jobs I never planned on and seem to be just as good as new. I used the biscuit joiner last Tuesday and it did just like it always has.
Reply:Good bandsaw we use them at worl,although I prefer the Porta-Cable because it's lighter and faster. I would have paid $75 for that in a heartbeat.I.B.E.W Electrician and Damn Proud of It !!!! .Virtus Junxit Mors Non Separabit http://www.shrinershospitalsforchildren.org/
Reply:What kind of GUN did you ise in the stick up???I would give $75 for the saw in a hart beatkeith The older the boys, the more expensive the TOYS!!Previous owned;Linde 300 Amp welderMiller Gas drv welder, Tumbstone,Dayton Miller ac to dc converter,High frequency unitLongevity LS60PCurrrently owned;Longevity WeldAll 200PI
Reply:is that a milwaukee?
Reply:Originally Posted by weldbeadis that a milwaukee?
Reply:Originally Posted by weldbeadis that a milwaukee?
Reply:Originally Posted by gclampIs there any other ????
Reply:.....Yes, nice Milwaukee.....andthey are $300....I'm maint guy where I work....fix these regularly, as they are stored on the floor at all times.....  Anything we buy, first thing you do is to run over the metal box a few times with the forklift....this is why we store tools on the floor....wood/metal boxes, shelves, pallet racks....all beat to death by solid-tire forklifts....make sure you run over the power cord plug a few times too....and don't forget to get the air hoses too....Dougspair
Reply:Hell yea! Way better than HF brand I bet!
Reply:Originally Posted by cmartman46Hell yea! Way better than HF brand I bet!
Reply:Originally Posted by dougspair.....Yes, nice Milwaukee.....andthey are $300....I'm maint guy where I work....fix these regularly, as they are stored on the floor at all times.....  Anything we buy, first thing you do is to run over the metal box a few times with the forklift....this is why we store tools on the floor....wood/metal boxes, shelves, pallet racks....all beat to death by solid-tire forklifts....make sure you run over the power cord plug a few times too....and don't forget to get the air hoses too....
Reply:Pretty good deal you got there.I might have ya beat though for $75.00................... Attached ImagesMarkI haven't always been a nurse........Craftsman 12"x36" LatheEnco G-30B MillHobart Handler 175Lincoln WeldandPower 225 AC/DC G-7 CV/CCAdd a Foot Pedal to a Harbor Freight Chicago Electric 165A DC TIG PapaLion's Gate Build
Reply:yep you got me beat.  I picked up that saw when I went with a friend to go get a table saw the guy had for sale.  I saw the red box under a pile of stuff and asked him what he wanted.  $75 was hard to low ball, It has been great, now I need to find the stand for it....
Reply:I'm keeping my eyes open for one of those too.  I bet I don't get a deal like that.MarkI haven't always been a nurse........Craftsman 12"x36" LatheEnco G-30B MillHobart Handler 175Lincoln WeldandPower 225 AC/DC G-7 CV/CCAdd a Foot Pedal to a Harbor Freight Chicago Electric 165A DC TIG PapaLion's Gate Build
Reply:Originally Posted by KF6OWCyep you got me beat.  I picked up that saw when I went with a friend to go get a table saw the guy had for sale.  I saw the red box under a pile of stuff and asked him what he wanted.  $75 was hard to low ball, It has been great, now I need to find the stand for it....
Reply:ooooops Attached Images
Reply:Weldbead Take a look at this stand.http://www.pirate4x4.com/forum/showthread.php?t=748205I never used one but it looks fairly decent. I was thinking about fabing something similar for mine..No government ever voluntarily reduces itself in size. Government programs, once launched, never disappear. Actually, a government bureau is the nearest thing to eternal life we'll ever see on this earth! Ronald Reagan
Reply:Originally Posted by DSWWeldbead Take a look at this stand.http://www.pirate4x4.com/forum/showthread.php?t=748205I never used one but it looks fairly decent. I was thinking about fabing something similar for mine.
Reply:Those are great!I use those on a daily basis at work. About a year ago It took a **** and was replaced with a DeWalt. I'm NOT a big fan of anything from DeWalt but I like it way better than the Milwaukee . Some of you guys have probably either seen or used them.
Reply:I just picked up a Milwaukee portaband standard depth for $70, it looks brand new along with a 4.5 milwaukee angle grinder for $30. Got to love craigslist.-DanOwnerDW Metalworks LLCMiller Trailblazer 302Miller 8RC FeederMiller Passport PlusMiller Dynasty 200 DX W/Coolmate 1Hobart Handler 135Hypertherm PowerMAX 30Smith O/A Torch SetPlus much much more
Reply:Originally Posted by weldbeadi dont see what holds the portaband up in position... nice table tho..::
Reply:If I didn't know any better...Found the same exact thing on CL in WNY.http://buffalo.craigslist.org/tls/1402190827.htmli got a Milwaukee porta-band standard depth on weekend for $120 brand new not even a scratch w/ case at a flea market but the best part is the next week i found a like new stand in the DUMPSTER at work............  somebody was cleaning and didn't know what it was............score