Built a new welding table- strength tested by Kubota

admin

Never was good with engineering formulas anyway.  Attached ImagesMiller Bobcat 250Syncrowave  200Millermatic 252Spoolmatic 30ASpectrum 625 X-TremeMaxstar 150SVictor O/A torchesDewalt angle grindersWelded on/off for over 40 years.
Reply:Good looking table
Reply:Good looking tractor too ! Far superior to that Green P.O.S. made in murka .That's about the same size as my old 955JD/4WD I had in 1993, but a hell of a lot better.Is that hydrostat drive or clutch ? OH ! Nice table.Bubble gumTooth pixDuct tapeBlack glueGBMF hammerScrew gun --bad battery (see above)
Reply:Hydrostat drive. If it wasn't for the front end loader, I wouldn't have gotten any work done with my back issues.Last edited by Gobysky; 12-22-2013 at 11:42 PM.Miller Bobcat 250Syncrowave  200Millermatic 252Spoolmatic 30ASpectrum 625 X-TremeMaxstar 150SVictor O/A torchesDewalt angle grindersWelded on/off for over 40 years.
Reply:Bad to the Bone.3 cyl diesel ?Bubble gumTooth pixDuct tapeBlack glueGBMF hammerScrew gun --bad battery (see above)
Reply:That table will come in handy, when you have a crack in the front-end-loader bucket!Well done.KevKevin / Machine_Punk from The Aerodrome Studio - Lincoln PowerMIG 210 MP - Meco N Midget w/custom welding station - Vintage Victor 100Current Projects: The Aerodrome Studio
Reply:You could probably park the whole tractor on it if you could get it high enough. What thickness is table top?
Reply:Nice job, love the pic! Im a big fan of kubota myself. Great machines!I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:Originally Posted by weldermikeNice job, love the pic! Im a big fan of kubota myself. Great machines!
Reply:gotta like that square tubing. 2x2?i.u.o.e. # 15queens, ny and sunny fla
Reply:Originally Posted by BurpeeMiguel, you forgot the myth of " Jap crap" ? I think in another five years your shop will resemble a showroom at Harboring Fright !
Reply:Nice table frame. The design ideas on this forum are numerious Nice tractor I have a B7800 HST great machineNice tractor mike could use a seat warmer thoughSent from my SPH-D700 using Tapatalk 2Backed my CATMA over your CARMA oops clusmy me  What would SATAN do ?? Miller Trailblazer 302 AirPakMiller Digital Elite  Optrel Welding HatArcair K4000Suitcase 12RC / 12 VSHypertherm PM-45Rage 3 sawRusty old Truck
Reply:LOL Al true! Thanks! I stand corrected. Kubota went into business in 1890. I think theyve proved themselves.I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:Nice tractors and lots of American jobs. Partial list from their website: http://www.kubota.com/AboutKubota/CompanyInfo.aspxKubota Manufacturing of AmericaHeadquarters: Gainesville, Georgia, U.S.A.Kubota Manufacturing of America (KMA) was formed in 1988 as Kubota’s North American manufacturing base. KMA manufactures and assembles Kubota lawn tractors, zero-turn mowers, sub-compact tractors, utility vehicles, loaders, backhoes and other implements. The company employs 1200 workers. Two master buildings offer 616,000 square feet of manufacturing space. Today, approximately one-half of all Kubota branded equipment sold in the United States is manufactured or assembled at its 151-acre Gainesville, Georgia facility.Kubota Industrial EquipmentHeadquarters: Jefferson, Georgia, U.S.A.Kubota Industrial Equipment (KIE) was established in 2004 to expand Kubota’s North American Manufacturing base.  KIE manufactures tractor implements including loaders and backhoes in their 440,000 square foot facility.  In early 2012, construction of a new 460,000 square foot factory was started on KIE’s existing 88 acre site. The new facility will produce compact tractors for the North American market from January 2013. Hey Mike - you're right, orange is the best color Last edited by MinnesotaDave; 12-23-2013 at 09:58 AM.Dave J.Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~ Syncro 350Invertec v250-sThermal Arc 161 and 300MM210DialarcTried being normal once, didn't take....I think it was a Tuesday.
Reply:Originally Posted by weldermikeLOL Al true! Thanks! I stand corrected. Kubota went into business in 1890. I think theyve proved themselves.
Reply:I like the table, except for the bar along the ground, where my pedal would go.  Very stout!  I used 2x2 on my table as well, topped with some weird-coated plate I got from a guy who got it from a ship yard.-AaronJet 17.5" Drill Press1942 South Bend 16x84 Lathe1980s Miller 320A / BP --- 2013 Power Mig 2562012 Jet 7x12 Horizontal BandsawVictor O/A Setup
Reply:Originally Posted by rabidchimpI like the table, except for the bar along the ground, where my pedal would go.
Reply:Excellent choice. Kubota builds one of the best diesels used in marine generators. Very dependable, quiet (for a diesel) and highly regarded.Used to own a Case 530 CK loader/backhoe, another very well made machine.
Reply:Originally Posted by BistineauYou could probably park the whole tractor on it if you could get it high enough. What thickness is table top?
Reply:Originally Posted by rabidchimpI like the table, except for the bar along the ground, where my pedal would go.  Very stout!  I used 2x2 on my table as well, topped with some weird-coated plate I got from a guy who got it from a ship yard.-Aaron