Single phase Linde Tig setup in MN or IA $500

admin

Posted this in another thread and never got a response so I'm posting it as its own topic hoping to get some interest.  I'm selling a Linde (now L-tec) UCC-305 stick/tig machine as its sitting at my parents place not getting used and I'd like to get something new enough & small enough that I can throw into my truck for mobile jobs.  The UCC-305 is a big unit, weights about 800 lbs and will fit in a 6' truck bed no problem, but I just don't have room for it in the shop at my new job and hate to see a good tool go unused.  Setup includes:UCC-305 3-380A CC power source, hi-freq, postflow, soft start & arc controlHeavy duty cart & castersPower source & tig torch Manual (burnt to CD I only have a digital copy)Esab brand PedalC&K Worldwide thumb amptrolWeldcraft water cooled torch WP-18Big quality ground clampHomemade chiller, reservoir, Procon Pump 1/3 HP 110V motorFor additional money I can include the argon bottle & regulator but I'd rather keep it for use with a setup I'll get in the future.  IIRC the bottle is a 260 CF, its huge.  This machine is set up for single phase 220, will run up to 200A on a 40A breaker.  Can be Demo'ed at my parents house in Delano, MN if I get some serious inquiries I can bring it down to my work in Boone, IA (near Ames) or deliver  Can load into your truck.  I'd rather not post my email addy in full so PM me with your email addy for details/pictures.  Would like to get $500 or will consider trade/partial trade for a stomp shear, brake, or Esab/Thermal Dynamics plasma cutter 30A+I've attached a picture of the same machine but unfortunately do not have any quality pictures of my own.  Mine is identical except that someone welded a pair of cable holders on the RH side of the machine.  It makes some nice welds on steel, stainless & aluminum.Last edited by greenbuggy; 03-04-2009 at 02:20 AM.
Reply:I've brought it down with me to my work in Boone, IA where its hooked up and can be demo'ed, I'll be using it for the next week to repair aluminum canoes after that it can be picked up.  Call if interested Kris 612-296-4638