|
|
http://www.northerntool.com/shop/too...2399_200442399Might help some of you who are building tables
Reply:The 12" and 18" ones are $10. http://www.northerntool.com/shop/too...receiver-tubesI got a couple 6" and a couple 18". Bought $50. worth of stuff and used coupon code 172544 for $10. off (good until 12/31). Had them shipped to the local store for free. They didn't do a great job of removing the flash, but they are very thick-walled."USMCPOP" First-born son: KIA Iraq 1/26/05Syncrowave 250 w/ Coolmate 3Dialarc 250, Idealarc 250SP-175 +Firepower TIG 160S (gave the TA 161 STL to the son)Lincwelder AC180C (1952)Victor & Smith O/A torchesMiller spot welder
Reply:its only worth it if they are in a store near you!!
Reply:If you happen to have amazon prime, these are the way to gohttp://www.amazon.com/Curt-Manufactu...=receiver+tubeThe raw finish is so much better than having to grind off that thick coat of paint.
Reply:I would grind it off for $5 a piece
Reply:I just bought a 36" tube yesterday $34. Doesn't seem like a good deal today. It will last a while though. That coating does ruin sanding pads Sent from my SPH-M830 using Tapatalk |
|
发表于 2021-8-31 22:41:05