WHAT IS THE NICEST INNERSHEILD WIRE TO RUN in all position

admin

I know there is a lot of innersheild wire out there what is the smoothest to run in all positions that you can use on any thickness with multiple passes.
Reply:I like Lincoln NR-211
Reply:Lincoln NR-212, but Lincoln says it's limited to 1/2. Hobart's 21-B, but Hobart says it's limited to 3/4. Before the Northridge earthquake I can't tell how many 1-inch side bend tests I passed with 21-B. That earthquake made everybody pull in their horns!Don’t pay any attention to meI’m just a hobbyist!CarlDynasty 300V350-Pro w/pulseSG Spool gun1937 IdealArc-300PowerArc 200ST3 SA-200sVantage 400
Reply:agree with the 211Vantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.
Reply:I agree with CEP.  I love those two wires.  I had rounder with a boss about the new limitations on some of the wires.  I knew I had read the new restrictions, but the boss was like we have always done it before.  Our disagreement wasn't ugly, only one of those long winded discussions over the coffee pot due to each of us always pulling pranks on stupid stuff before and after work.  I had a print shop fake some MSDS sheets and he ended up staying up all night preparing for a new safety meeting which sort of backfired due to him having me go through and make sure all the MSDS sheets were up to date and then had me do the safety meeting with him asking loaded questions I had no idea about.  So yeah, The wires are excellent and my favorite and yes they now have limitations which he figured out after calling the manufacturers after I left.