Bumper Build scrapping old thread starting over

admin

Heres a job I just got done for my brother in law. Everything was made using 1/4" and 3/16" plate. Hand cut all pieces with my Hobart plasma cutter and welded using my old MM200. Got to do a little tigging as well on the light bar mounts on the windshield. Think it all turned out good he was very pleased. Made the rock sliders as well.
Reply:am i missing something. I don't see any picturesyou ain't gotta eat it
Reply:Tried loading these pics with ipad on old tread and every single one posted upside down.  Anyways here they are with my digital camera enjoy.
Reply:Looks Great!  Where's the rear license plate go?I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:Originally Posted by weldermikeLooks Great!  Where's the rear license plate go?
Reply:Looks good. But where do you find a Samurai with enough steel left in the rockers to bolt to? If you cant fix it with a hammer, it must be an electrical problem."Boy, everyone starts with a full bag of luck and an empty bag of experience. The trick is to fill the bag of experience before the bag of luck is empty."-Grandad circa 1990ish
Reply:Nice, that's worth then the Samurai .
Reply:pretty slick job.i.u.o.e. # 15queens, ny and sunny fla
Reply:Thanks heres just gonna screw the license plate to the tailgate.  Ya it was rotted out where the rock sliders went it's got 2" square tubing welded straight to the frame holding them.