Plasma dust

admin

I cut about 1 sheet of 3/16 a week and the dusts get every were, the bad thing is I have a old 55 chev and I hate to see it get black all the time, is there anything I can do to keep the dust down.L&L custom Jeep Bumpers
Reply:Maybe a suction fan near the cutting area.Probably tarp the Chevy.tractor,loader.dozer,backhoe,and all the tools to keep em movin
Reply:Originally Posted by 1-800minerMaybe a suction fan near the cutting area.Probably tarp the Chevy.
Reply:The cheap solution is to cut over water. Build a tank 3” to 4” deep, set your cutting grate abut 2” above the water. You'll be amazed how much the water will cut down on the dust!Don’t pay any attention to meI’m just a hobbyist!CarlDynasty 300V350-Pro w/pulseSG Spool gun1937 IdealArc-300PowerArc 200ST3 SA-200sVantage 400
Reply:I'll second the water table plan. We tried fume extractor/hood thing that did next to nothing. Then we tried the water table and it worked great. Just be sure to get some of the water additive to keep the rust away.
Reply:post up some pic of the water table I think i my go with thatL&L custom Jeep Bumpers
Reply:You don't need this much water. Don’t pay any attention to meI’m just a hobbyist!CarlDynasty 300V350-Pro w/pulseSG Spool gun1937 IdealArc-300PowerArc 200ST3 SA-200sVantage 400
Reply:Lime Kool-aid????200amp Air Liquide MIG, Hypertherm Plasma, Harris torches, Optrel helmet, Makita angle grinders, Pre-China Delta chop saw and belt sander, Miller leathers, shop made jigs etc, North- welders backpack.