Got a few of these rollers to "Freshin' Up"....Need to be cleaned and polished for a "Dry Felt" transfer for roofing shingles...Dry Felt my A$$More like fiberglass felt...Lots 'O' Fun to clean...Just a polish is needed so all we need is a brown Scotchbrite pad and the tool holder..Pics tell the story..Lathe was around 400 RPM...Feed was "Kinda Fast"...Little wax on the surface and just sit back and watch..I get all the fun jobs.....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:more than one way to skin a kat. Course a real man would have done it by hand with a little elbow grease. goes to show what a little thought will save you in time and hassle
Reply:Nice job Zapster -- an "outside honing" operation. Originally Posted by zapsterGot a few of these rollers to "Freshin' Up"....Need to be cleaned and polished for a "Dry Felt" transfer for roofing shingles...Dry Felt my A$$More like fiberglass felt...Lots 'O' Fun to clean...Just a polish is needed so all we need is a brown Scotchbrite pad and the tool holder..Pics tell the story..Lathe was around 400 RPM...Feed was "Kinda Fast"...Little wax on the surface and just sit back and watch..I get all the fun jobs.....zap!
Reply:Very cool!
Reply:3m actually makes deburring wheels which are made from their scotch bright pads. They come in different grits and densities. They work AWSOME for polishing stainless and aluminum.
发表于 2021-8-31 22:38:02