welding table and some welding pictures from LWS

admin

decided to initially go to school for information technologies (IT guy) but quickly grew hating my white shirt and choker leash (ties and a jacket) so i finally broke down and talked to some friends and family and found out weddings been in my family now a while decided why not looked fun to me i like being dirty and working hard. (get told all the time i need mental help for that..)some of these are OFW,GMAW,SMAW,GTAW and some are different positions the LWS goes by aws d1.1 code and asme but i don't know asme code. some not bad some look terrible.looks like im limited to so many pics ill post some more Attached Images
Reply:some more, the helmet was after i think 2 hrs and 5lbs of 7018,6010 couldn't understand why was so hard to see... Attached Images
Reply:torwards end of the year where i improved drastically sorry i dont have anymore. Attached Images
Reply:this is a project i have for a class, welding tablethe material im looking at is 2"x2"x7gax20' (2) sqr tubing1"x1"x1/4x20' angle (2)1"x1"x3/16x20"(1)6'x5'x3/8 plate (1)1 1/2x9ga 4'x10' expanded metal flat (1) from mill they wont cut4" casters locking (4) 450lbs eabench visei kinda worried about distortion, this will be my main welding and fabing table so their will be beatings with hammers, heating material, cutting and grinding etc want to make sure this will also hold the machine im looking to purchase either looking at a XMT304 or a thermal arc 211I im waiting to hear back from a guy.take it easy on me gents first ever blueprint ive ever written so im treading new murky water here.. and no weld symbols yet we havent covered in class so far so we were instructed to get this far and stop. Attached ImagesLast edited by demonicwolf; 02-28-2014 at 02:10 PM.